Busbar - Phase busbar 4-p 10mm² 212mm PS4/12NA

PS4/12NA 2CDL240213R1012 4016779656139 EAN/GTIN DE 91945327 WEEE

Our best price
$15.43 excl. VAT
$23.85 (-35.3% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
PS4/12NA busbar, number of phases 4, number of poles 12, suitable for number of devices 3, pitch... more
Busbar - Phase busbar 4-p 10mm² 212mm PS4/12NA – ABB – 2CDL240213R1012 – 4016779656139: PS4/12NA busbar, number of phases 4, number of poles 12, suitable for number of devices 3, pitch 17.5mm, cross section 10mm², length 212mm, rated uninterrupted current Iu 63A, design of the electrical connection pin, insulated, rated impulse voltage 4kV, max. rated operating voltage Ue 690V, Rated short-time withstand current Icw 25kA, suitable for devices with N conductors, ABB busbars enable safe and economical cross-wiring of automatic circuit breakers, residual current protective devices and other modular installation devices. The following must be considered for a correct phase busbar selection: terminal type (double terminal or cage terminal), number of poles of the devices (1, 2, 3, 4, 1+N or 3+N), device type (automatic circuit breakers, residual current devices or modular installation devices), combinations of the various device types, use of circuit breakers with auxiliary switches mounted on the right and bottom, phase busbar connection cross-section (current carrying capacity), number of modules (choice of standard busbars or busbars that can be shortened)
... more
Number of phases 4
Number of poles 12
Suitable for number of devices 3
Pitch 17.5 mm
Cross-section 10 mm²
Length 212 mm
Width in division units 12
Rated continuous current Iu 63 A
Execution of the electrical connection Pen
Isolated yes
Rated surge voltage 4 kV
Max. Rated operating voltage Ue 690V
Rated short-time withstand current Icw 25 kA
Suitable for devices with neutral conductor yes
Suitable for devices with auxiliary switch no
Colour gray

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Busbar - Phase busbar 4-p 10mm² 212mm PS4/12NA"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.