Installation contactor 25A 48V AC/DC ESB25-22N-03

ABB - ESB25-22N-03 - Installation contactor 25A 48V AC/DC ESB25-22N-03
Photo source: fig. possibly similar
Photo source: fig. possibly similar
ESB25-22N-03 1SAE231111R0322 4013614517785 EAN/GTIN DE 91945327 WEEE

$48.64 excl. VAT
$104.05 (-53.25% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Installation contactor 25A 48V AC/DC ESB25-22N-03 rated operating voltage 220 ... 400V, rated... more
Installation contactor 25A 48V AC/DC ESB25-22N-03 – ABB – 1SAE231111R0322 – 4013614517785: Installation contactor 25A 48V AC/DC ESB25-22N-03 rated operating voltage 220 ... 400V, rated operating current 25A, utilization category 7, rated operating voltage 48 ... 48V, voltage type of the operating voltage AC/DC, voltage type of the operating voltage AC/DC, number of contacts as NO contacts 2, number of contacts as NC contact 2, number of pitch units 2, installation depth 58mm, additional equipment possible, degree of protection (IP) IP20, 4-pole contactors ESB25..N with a width of 36 mm control 3-phase loads up to 25 A and are available in different Contact assignments and coil voltages are available. They switch electric heaters, water heaters, motors for pumps, ventilation and other drives as well as lighting. Thanks to an integrated coil circuit, they work with both AC and DC control voltages. The devices are therefore absolutely hum-free and quiet when switching. An auxiliary switch that can be mounted on the left as an accessory, as well as sealing caps and a spacer complete the range. ESB25..N have installation design and meet, among other things, the household standard EN61095, they are therefore particularly suitable for installation in distributors.
... more
Rated operating voltage 220..400 V
Rated operating current 25 A
Utilization category 7
Rated control voltage 48V
Voltage type of the operating voltage AC/DC
Voltage type of the actuating voltage AC/DC
Number of contacts as normally open 2
Number of contacts as opener 2
Slider for manual operation no
Width in division units 2
Depth 58 mm
Additional equipment possible yes
With day/night function no
Hum-free yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Installation contactor 25A 48V AC/DC ESB25-22N-03"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.